A12WC
AM1202.1 Motor Mount..
$27.00
AM1203WC Battery Plate..
$128.00
AM1204WC Chassis Plate..
$64.00
AM1205.1 Side Stiffener..
$22.50
AM1206 Front Nut..
$14.00
AM1207.1 Left Bulkhead..
$27.00
AT1201 Steering Block Nut x 2..
$6.00
AT1202 Servo Post x 2..
$14.00
AT1203X Rear BeamAwesomatix A12X Rear Beam.
Updated version with an additional notch for easy..
$31.00
AT1204-X Steering Block..
$38.50
AT1206 Servo Plate Post x 2..
$12.00
AT1207-X Left Hub..
$29.00
B156 Flanged Bearing x 43/16 x 5/16 Flanged bearing..
$10.50
B168 Flanged Bearing x 2..
$8.50
C1201-X Servo Platereplaced by A12-C1201-X3..
$19.50
C1203.1 Body Holder..
$19.00
C1204 Bumper Plate..
$17.00
C1205-X Suspension Plate..
$47.00
DT1202 Steering Washer x 2..
$6.00
DT1213 Side Spring Holder x2..
$11.50
DT1214 Downstop Screw HolderNew part for the recent update to the A12WCA12WC UPDATE INFO:ST1202 is r..
$4.50
LRC SetLRC (Low Roll Center) set is +1mm higher roll center measured from the lower face of AM1204 c..
$20.00
OR15 1x5mm O-Ring x 2ORing used on the rear axle bearing..
$3.00
OR153V 1.5x3mm O-Ring x2Rear Dampener ORing for original A12..
$3.00
OR155SI 1.5x5mm O-Ring x4Red ORing for use within the front spindle..
$8.00
OR230 2x30mm O-RingBattery retention ORing..
$2.50
OR91 9x1mm O-RingSpool Spur ORing used with thick / ball diff-styled spur gears..
$2.00
OR915 9x1.5mm O-RingSpool Spur ORing used with thin / TC-styled spur gears..
$2.00
P1213 Ball Cup 4.0mm x 2..
$3.50
P1215 Foam Bumper..
$11.50
SB3X4 - M3x4 Button Head Screw x 2..
$4.50
SB3X5S - M3x5 Small Button Head Screw x6The unknown part of the A12 kit -- these screws have special..
$7.00
SC25X8 M2.5x8 Cap Head Screw x 2..
$2.00
SC3X6 M3x6 Cap Head Screw x 6..
$5.00
SH1.5W Spacer x 3On the A12, shims used to mate the inner and outer frame and bumper together..
$6.00
SH12F0.5 Front Axle Shim x 4..
$5.50
SH12R0.5 Rear Axle Shim x4..
$7.00
SH12R2.0 Rear Axle Spacer 2.0mm x 2..
$5.00
SH12R3.5 Rear Axle Spacer 3.5mm..
$3.50
SH12S-0.2 Spring Shim x14On the A12, shims used to adjust the height of the spindle and apply differ..
$8.00
SH4.0 6x3x4.0mm Spacer x 4On the A12, shim used to space the body / spring holder from the inner cha..
$8.00
SH5.5X7.7X0.05 Shim x 2Shims used within the various roll center options on the A12X and A12WCLRCHRC..
$2.50
SPR12F-C1.1 Front Spring x 2Awesomatix A12 Front Spring C1.1 (DARK BRASS)contains: 2pcs SPR12F-C1.1..
$7.00
SPR12S0.5 Side Spring C0.5 x 2..
$8.00
ST1201-X 3mm Ball Stud x 2Replaces part A12-ST1201..
$7.00
ST1202 Damper Rotor..
$17.50
ST1203.1 Downstop Rod..
$12.00
ST1208-C4AL Alloy Steering Block Post 4deg. x2..
$44.50
ST1211 Spring Retainer x 2..
$12.00
ST1248 Battery Plate Nut..
$3.50
ST1254 LRC Seat x 2..
$6.00
ST1255 LRC Nut x 2..
$6.00
ST1256 LRC Rear Ball..
$5.00
ST1257 LRC Front Ball..
$5.00
ST1260 Tapered Spacer..
$3.50
ST24-4.0 4.0mm Ball Stud x 2..
$5.00
STA1212-X Composite Axle..
$42.50
T03 6/7mm wrench..
$17.50
P13-4 Open Ball End x 2The parts are designed to replace the standard upper inner pivots for the cam..
$3.50
SB3X10 - M3x10 Button Head Screw x 4..
$5.00
SB3X8 - M3x8 Button Head Screw x 4..
$5.00
SF3X10 - M3x10 Flat Head Screw x 4..
$5.00
SF3X6 - M3x6 Flat Head Screw x 4..
$5.00
SH0.1 - 6x8x0.1mm Shim x 10..
$5.00
SH0.5 - 6x3x0.5mm Spacer (Silver) x 10..
$9.00
SH1.0 - 6x3x1.0mm Spacer (Gray) x 10..
$9.00
SH1.75 - 6x3x1.75mm Spacer (Black) x 10..
$9.00
SPR05 - Body Clip x 8..
$8.00
SS3X10 - M3x10 Set Screw x 4On the A12, used as the droop screw for the rear dampener..
$4.50
SS3X5 - M3x5 Set Screw x 4..
$5.00
ST24 4.8mm Ball Stud x 46mm long..
$9.00
AT25-2 - Turnbuckle 39mm x 2..
$10.00
DG1X - Damper Gauge..
$21.50
DG1XM Damper Gauge..
$21.00
P14-2 - Body Post x4..
$12.00
SB3X12 - M3x12 Button Head Screw x 4..
$4.50
SB3X5AL - M3x5 Alloy Button Head Screw x 8..
$14.50
SB3X6 - M3x6 Button Head Screw x 4..
$5.00
SH0.25 - 6x3x0.25mm Spacer (Silver) x 10..
$9.00
ST112 Centering Screw x 8New A800R Part..
$19.50
STS-A12WC Stickers Sheet A12WC..
$7.00
Showing 1 to 82 of 82 (1 Pages)
